---

name: rally-content description: Add or iterate Gravel Rally assets (trees, rocks, props, signs), cars (model + livery) and procedural textures, keeping instancing/LOD performance. Use for any request about rally visuals, models, cars, liveries, vegetation, props or textures.

Rally assets, cars, textures

Assets (anything placed in the world)

Two files per asset:

1. src/games/rally/assets/catalog.ts — metadata: id, category, variants (seeds used in-world), lods (maxDistance, castShadow, near -> far), colliders (cylinder/sphere in local space; omit for drive-through things), tint (per-instance colour jitter).
2. A builder in assets/builders/<category>.ts registered in assets/library.ts BUILDERS: ({ seed, variant, lod }) => ({ parts: [{ geometry, material }] }).

Rules (performance — late-2000s look must not lag):

• Use engine/geo.ts (paint, merge, shade, foliageNormals, UV helpers): non-indexed, vertex-coloured, merged into as FEW parts as possible. Each part = 1 draw call per (variant, LOD).
• Materials ONLY from engine/materials.ts (getMaterial(id)); add a new id there if needed. Never new Material inside a builder. Foliage materials carry defines for the world shading (engine/world-shading.ts): RALLY_WIND (sway, bends ~ height² above the asset origin - keep origins at ground level), RALLY_FOLIAGE (backlight glow), RALLY_GROUND (receives the far canopy shadows). A material with its own onBeforeCompile must call addWorldUniforms(shader).
• Trees are not catalog builders: src/games/rally/trees/ grows them (L-system species -> skeleton -> mesh -> impostor; see the "Trees" bullet in rally DETAILS.md and .claude/reference/trees/), placed by the old tree type ids (TREE_TYPES). For other assets: far LODs must not cast shadows and set oneVariant (all variants share one bucket = one draw call).
• Variants are cheap in draw calls: other LODs are drawn as variant sets (one draw per asset / LOD / material, see DETAILS.md "Draw calls"). Every variant's parts must share the same attributes (position, normal, color, uv) or the asset falls back to one draw per variant; keep LOD0 tree crowns small - sets over the cap are not merged.
• Front of props faces +Z, origin at ground level.
• Alpha grass cards: foliage_card (olive green) / foliage_card_spring (bright green) / foliage_card_dry (golden) - the card TEXTURE carries the colour, vertex colour only varies it (a green texture x golden vertex colour = dark olive).
• Buildings (assets/builders/buildings.ts): UNIT footprint (x, z in [-0.5, 0.5], y 0..1), scaled per instance with ScatterInstance.sx / sy / sz (width / height / depth) and a box collider; keep details relative. house_pitched walls end at HOUSE_WALL_FRACTION of the height (roof above), building_flat styles 0/1 hall, 2 brick block, 3 rendered block; variants 4-7 = two floors of windows.
• Vegetation palette so far (trees: one L-system species each, trees/species.ts TREE_TYPES): pine_tree, plantation_pine (a cheaper pine for dense stands), black_pine (umbrella crown), juniper, birch_tree, oak_tree, beech_tree (mountain beech), hornbeam_tree (bright-green coppice), walnut_tree, willow_tree (weeping), poplar_tree (columnar), cypress_tree (dark column), locust_tree (black locust), bramble_shrub, fruit_tree (orchard rows), hazelnut_tree (plantation rows), pale_tree (tall plane / ash), young_tree (sapling), thicket_shrub (autumn roadside brush, drive-through), broom_shrub (yellow flowering broom), bush (green), scrub_bush (dark olive hill scrub), grass_tuft, spring_grass, dry_grass; props incl. street_lamp, road_barrier (red-white police / marshal barrier, solid, closes side-road junctions), tape_post (5.2 m of red / white tape along local X), fan_flag (generic designs, no national / club flags).

Iterate at /games/rally/asset-debug.html?asset=<id>&seed=<n>&lod=<n>&grid=20&bounds=1&collider=1 (seed=-1 shows the in-world variant). grid is an instancing stress test; watch F3 stats.

Cars

One folder per car: src/games/rally/cars/<car>/<car>.ts exporting a CarDef, registered in ALL_CARS in cars/index.ts. Release flags (src/games/rally/release.ts - one file tracks all cars + maps): add a new car to CARS_LIST with hideInProd: true (required - tests/rally/release.test.ts fails for an unlisted car). It is then dev server + test build only (npm run dev / npm run build:test use ALL_CARS), marked TEST in the menus / HUD / tool pages, and left out of npm run build. Remove the flag to ship it (or set it again to pull it from the published build). Car-specific extras (e.g. a custom part builder) go in the car's folder; code used by every car (types, body, model, parts, livery, glTF import) lives in cars/shared/.

• sound: engine layout, displacement, exhaust / intake, turbo + anti-lag, pops, gearbox, whine, cam - match the real engine (rally DETAILS.md "Sound"; tests/rally/engine-sound.test.ts checks the ranges).
• Every car needs a body for when it has no GLB or the GLB fails: model.custom (hand-built, below) or model.profile (an imported car's boxy stand-in: its side outline extruded to the body width with glass + lamps, cars/shared/profile-body.ts; it wears the livery when the car's CarAtlas sets layout = its model.source.json atlas block). Bake it from the plain GLB into the car folder: node scripts/car-model/side-profile.mjs public/models/cars/<file>.glb --axles <front z>,<rear z> --wheel <radius> > src/games/rally/cars/<car>/profile.ts. The city maps' parked cars use these profiles too (assets/builders/vehicles.ts SHAPES). Required for every imported car: rally-car-import step 6c. tests/rally/car-fallback.test.ts checks it; see it with car-viewer.html?car=<id>&fallback=1.
• model.wheels(radius, width) = car-specific tyre + rim geometry (a tyre with a color attribute is drawn with vertex colours); model.glass = window tint; model.paintFinish: 'satin' = old paint; rim.style: 'steel' = holed steel wheel, no caliper.
• model.wheelModel = a wheel GLB made from rim + tyre STLs (scripts/car-model/wheel-stl-to-glb.mjs, unit wheel space, scaled per car by cars/shared/stl-wheel.ts; adds a brake disc + hat + caliper behind the open spokes). skoda_rally_wheel.glb (the imported model's own rim, --keep) is on the Skoda Rally. For another wheel STL, re-measure the rim with cross-sections and adjust the strip rules in the script (print-only tubes / plates hide the brakes).
• model.rim: color, spokes, style spoke|steel (the procedural wheel, until / unless a wheel GLB loads).
• Livery = the car's atlas painter (CarAtlas.paint, rally-livery skill) with seeded colours from cars/shared/livery.ts (liveryInfo: base + 2 accents; seed 0 = model.paint; no real brand logos). Liveries carry no numbers / lettering: the car number + rally name are the door plate (cars/shared/rally-badge.ts, a decal projected onto the paint). Place it per car with model.doorBadge (z, y, optional tilt in degrees to follow a sloping body line; check both sides in the car viewer with &num=7&rally=<map> - clear of handles / seams).
• Model space: y = 0 ground at ride height, z = 0 centre of mass. For wide-arch cars set physics track so the tyre's outer face sits just inside the arch.
• Per-car performance bands live in tests/rally/vehicle.test.ts (BANDS) - add one for every new car.

Free camera for close-ups / screenshots: add &cam=x,y,z&look=x,y,z&fov=10&clean=1 (model space, +z nose, +x car's left; clean=1 hides the panel; the panel's "Copy camera link" button copies the current view). Liveries (create / fix / debug): the rally-livery skill + scripts/car-model/chart-probe.py.

Iterate at /games/rally/car-viewer.html?car=<id>&seed=<n>&view=side&hull=1&wire=1 (pose sliders for steer/suspension, specs + torque/power chart, "Test drive" link). Physics changes -> rally-physics-tuning skill. Console: __carViewer.model.

Hand-built bodies (model.custom) - example: cars/zastava-101/

When there is no mesh but there is a blueprint, build the body in code (which cannot do crisp creases, leaning noses or clean window openings):

1. Measure: crop + upscale each blueprint view with a pixel grid, find the scale from the wheelbase (hub centres), and write every curve into <car>/blueprint.ts (centreline silhouette, pillar / rail edges, crease, plan half width, arches, windows, seams). Use the dimensioned numbers where the drawing gives them.
2. <car>/body.ts builds the mesh with cars/shared/mesh-kit.ts (Soup: grid, polygon with holes, sweep, creased normals): body-side columns at stations (dense round arches + corners, rows on circles round the arch so the lip is crisp), top rows from nose to tail ending on the side / pillar edges, a polygon for the cabin sides with the window openings, nose / tail panels; then glass, rubbers, lamps, bumpers, cabin. It returns { paint, parts } (CarCustomBody.build): paint gets the atlas texture, parts is the usual CarPartGeometry (trim, mesh, glass, lights, tail, amber, interior, cage = bright metal, lining, optional chrome = polished reflectors / bezels and lens = clear lamp glass). Lamps: build them as geometry on a local plane (cars/zastava-101/lamps.ts: frames, reflector dishes, ribbed lens slabs), not flat boxes.
3. <car>/paint.ts: atlas layout (atlasKit) + UV functions used by body.ts + the painter - plain projections (sides z-y, top z-x, ends x-y), so seams / dirt are drawn in model-space metres.
4. Check against the blueprint: copy it to public/_tmp/ (delete afterwards), overlay it as a fixed <img> (mix-blend-mode: multiply) on an orthographic car-viewer render - __carViewer.shell.camera fov ~2.6 from 60 m, near 20, aspect set, panel hidden - scaled / placed from two projected model points. Side, top, front, rear.
5. Pin the key dimensions in a test (tests/rally/zastava-body.test.ts); keep the car under ~35k triangles.

Importing a model? Start in .claude/skills/rally-car-import/SKILL.md

That skill is the workflow (scan gate -> orient -> measure -> naked check -> parts -> materials -> livery -> verify -> docs); the two sections below are the API reference it points at. Its step 1 (scan-mesh.py verdict) decides whether a model is imported at all - a blob verdict (image-to-3D) means the model is abandoned, not hand-cut.

Imported models (glTF / GLB, e.g. Sketchfab)

A real model replaces the car's custom / profile body when its file exists; that body is the fallback.

1. Licence gate first (.claude/skills/rally-car-import/SKILL.md): the model must allow redistribution of derivatives (CC0 / CC BY; no ND, no "personal use" / Standard Digital File licences). Then download it as glTF/GLB (Sketchfab: needs your login; CC BY needs credit).
2. Inspect / slim it (big models hurt: aim < 60k triangles, textures ≤ 2k, webp):

   npx @gltf-transform/cli inspect model.glb
   npx @gltf-transform/cli optimize model.glb public/models/cars/<file>.glb --texture-compress webp --texture-size 2048 --simplify-ratio 0.25
   

3. Reference it in the car: model.gltf = { file, credit, rotationY?, scale?, offset?, hideNodes? } (cars/shared/types.ts CarGltfDef) and bake its model.profile (above). Auto-fit: scaled to physics length, centred between the axles, ground = lowest mesh (tyres). Node names matching hideNodes (default wheel|tire|tyre|rim|brake|caliper|disc) are hidden - physics-driven procedural wheels are used.
4. The file list is baked in at startup (rsbuild.config.ts -> __CAR_MODEL_FILES__); the dev server restarts by itself when a file is added / removed in public/models/cars/ (dev.watchFiles). Production builds list what exists at build time. If the car viewer still says procedural, reload the page. Commit the GLB plain: the build serves it meshopt-compressed (scripts/car-model/glb-meshopt.mjs, dev server too; already-compressed files pass through).
5. Car viewer "model" row must say imported glTF; fix orientation with rotationY (front must be +Z), position with offset. Add a row to public/models/CREDITS.md. Files are served page-relative (<base>/models/cars/…), so subfolder hosting works.

STL bodies (untextured meshes, e.g. 3D-print / generated models) - example: cars/bimmer-m3/

The end-to-end order of work + every gotcha hit so far is in .claude/skills/rally-car-import/SKILL.md; the steps below are the tool reference.

1. Put the settings in the car folder: model.source.json (axes, scale, offset, wheel cut-outs, target triangles, atlas layout). Measure first: render the STL (or run the converter once) and read off the wheel centres / radius - scale so the wheel radius matches physics wheelRadius; offset puts the front axle on physics front.z.
2. Convert (the original STL lives in sources/cars/<car>/): If the STL is exported tilted (print-bed orientation), level it first with scripts/car-model/orient-tilted-stl.py (PCA + pitch / roll; check left / right symmetry and hub heights).

   node scripts/car-model/stl-to-glb.mjs src/games/rally/cars/<car>/model.source.json sources/cars/<car>/<model>.stl --preview atlas.png
   

   It welds, re-orients to model space, cuts the wheels out (cylinders at wheels.centres - procedural physics wheels replace them; that centre-based cut leaves saw teeth on big arch-lip triangles when a modelled tyre sits 1 cm from the lip - then label the wheel with a region circle in segment-stl.py and list its material in parts.drop: an exact clip, worked example cars/bimmer-m3/; give the region any: true so it also cuts triangles an earlier segment pick labelled, and parts.fills (converter) adds flat patches (e.g. glass continued under wipers: [{material, poly:[[x,y,z],...]}]); wheels.liner floorY to close the well's inner wall for a view from below; the liner takes the atlas' matte texel, so the car's atlas needs matteRect + a black patch there), simplifies (meshoptimizer, ~45k tris) and writes creased normals + projection UVs: each triangle goes to the left / right / top / front / rear chart by its facing, charts laid out in metres (+ a bottom chart like the top one when the atlas has room for it - otherwise one underside texel).
3. Livery = <car>/livery.ts exporting a CarAtlas (model.gltf.atlas, with autoFit: false): a canvas painter that draws in model-space metres (side(z, y) on both sides, top(z, x), end('front'|'rear', x, y), multi-contour shapes, per-side 'left' | 'right'). Use the --preview image (10 cm grid) to find window / light / vent positions. Shapes and plain boxes only - never text (the painter has no text helpers; number + rally name are the door-plate decal), no real brand logos. Build the livery up step by step with the user from a clean base colour - automatic photo tracing was tried on the GR Yaris and rejected (rally-car-import, "Livery"). Chart overrides: atlas.chartBoxes (stl-to-glb.mjs, boxes in model space, x mirrored): chart: 'top' sends up-facing triangles (normal y > minNy, default 0) to the top chart (crease walls inside a painted bonnet shape, a roof edge wall); chart: 'side' sends front / rear-facing ones - plus, with maxNy / minNy, steep or horizontal ones - to their own side chart (arch flares that share end-chart texels, shoulders next to a painted edge, sill ledges); chart: 'rear' / 'front' sends up-facing ones to the end chart (a low bumper lip among colour rows). Example + reasons: atlas.chartBoxes $comments in cars/bimmer-m3/model.source.json (summary: DETAILS.md "Livery chart boxes"); how to find the faces: rally-livery.
4. Wheel arches: wheels.arch (faceRadius, radius, maxNormalX, minAbsX) sends arch triangles to the atlas' matte texel; livery painters call atlasKit(...).matteRect (black fill) and export it as CarAtlas.matteRect. wheels.liner adds a dark wheel-well cup if the arch is see-through (lip: true also seals the slit between the cup rim and a cut edge further out; the rings are raycast to stay behind the skin). model.suspension: true draws uprights + wishbones + damper behind the wheels.
5. Accent parts (glass, lamps, grille, vents, wing, trim): never paint them on the atlas - projection charts overlap (a wing over the rear window) and triangle-by-triangle colouring gives saw-tooth edges. Split them off as real parts instead (example: cars/bimmer-m3/, parts block of its model.source.json):

   python scripts/car-model/segment-stl.py <model.source.json> <in.stl> <parts.stl> --preview seg --by segment
   node scripts/car-model/stl-to-glb.mjs <model.source.json> <parts.stl>
   python scripts/car-model/view-glb.py <model.source.json> check
   

   segment-stl.py splits the mesh into smooth patches along its creases and parts.picks assign patches to materials: seeds = [view, a, b] (the patch seen at those model coordinates; read them off the --by segment preview, --grid 0.02 --scale 2600 --crop ... for thin strips) and / or inside boxes. Use mirror: false with per-side seeds where the two sides are creased differently; hub picks (per triangle: surfaces inside a wheel arch that face the hub) make arch lips black without relying on creases. The converter writes one primitive per material name; cars/shared/part-materials.ts maps names to shared materials (trim, gloss, mesh, carbon, glass, headlight, lens, tail, reflector) - add new names there. parts.wrap materials get UVs fitted to 0..1 over the part (corner for lamps, side for side windows), so their textures are drawn in part space. Crease segments need a clean mesh with real feature edges (CAD / print models). Image-to-3D blobs (the former GR Yaris, deleted) have none - the import gate rejects them. region (an outline polygon measured in a view; triangles crossing it are cut along it) and box picks exist in segment-stl.py for the rare soft feature on a CAD mesh. Measure outlines on crease-highlighted renders (dihedral angle > 14 deg = the mesh's recess rings) at 1200+ px/m, one section at a time, and check each in the car viewer close up before the next.
6. Check in the car viewer (model row = imported glTF), add a CREDITS row.

Textures

Procedural canvas textures in engine/textures.ts (TextureId + entry in DEFS). Colour maps set color: true (sRGB); multipliers/masks false. View at asset-debug.html?asset=tex:<id>&repeat=4. To replace with real images later, return a loaded texture for the same id.

Done checklist

npx tsc --noEmit -p tsconfig.json, npm run lint, npm run test + npm run test:integration:rally (stage test catches colliders on the road), check F3 stats in game (__rally.benchmark(240) in the console). Open game URLs with mute=1 (AGENTS.md "Sound while testing").

Source files

Files / links the user provides (models, reference photos, data downloads) go to sources/ (git-ignored) and are listed in the car / map folder DETAILS.md - follow .claude/skills/source-files/SKILL.md. Models / references a player should see credited also go in CarDef.sources (label / url / note) - listed on the main menu About screen.

Tyres, rims and coil-overs

Every tyre comes from cars/shared/tyre-mesh.ts (size from CarPhysicsDef.tyres, tread per compound, compound ring); a car only supplies its rim (model.wheelModel GLB rim - rescaled per tyre size - or model.wheels for a custom rim + caliper) and flags (tyreDust). Coil-overs / struts for the setup screen: cars/shared/suspension-mesh.ts, pick model.suspensionStyle (rally / road / race). Verify in the car viewer (?tyre=tarmac|mixed|gravel) and on the setup screen (parts bench).